Need help with crate engine

ShadowVini

New Member
Joined
Feb 25, 2013
Messages
1
Karma
0
Car
Pontiac Trans-AM GTA
Hi guys, sorry for my bad english
I have GM crate engine on my Trans-AM, only numbers on it are on driver side head 9107#
where # I can't read number :cry:
 

ChevyHiPro

Moderator
Staff member
Joined
Oct 7, 2012
Messages
134
Karma
5
Car
1976 Chevy Cheyenne 1500 P/U
Hello and welcome to the forum!
No need to apologize for your English, mines pretty bad too!
:lol:

However, we're going to have to take another look at those numbers to come up with enough information to help you figure out what it is.
:eek:

Have a look here; on the passenger side, front of the block, just below where the head sits on the block.
This will probably be right behind the alternator.
There should be a raised pad, with two rows of numbers hand stamped on the pad.
'Due to paint, grease and dirt build up, it will be necessary to clean this area with some solvent and probably a wire brush.
Please write down the two rows of numbers and post them in this thread.
Also, on the rear of the engine, usually in the drivers side, there is a cast number (raised up) that is the Block Casting Number.
This is normally 7 or 8 digits.
This will be behind the flywheel!
Yes, the engine will have to be out of the car to see it!
Post this number also, if you can see it.
From those numbers I will try to help you decide what your engine is.
 

Latest threads

Top